The load test cannot be summarized.
The load test might not be summarized automatically for various reasons. If it happens, the load test can be forced to summarize by following the below steps:
In the AppLoader Controller, go to "Test Analysis" page.
Select the load test on the right pane and right click on it. Then click "Summarize Load Test" button. The Controller will try to summarize the load test. (It may need a few minutes to summarize the load test and generate a report.)
Important: While following the steps described in this article, please write down the results you get so that you could send them along with the Controller.log (…\NrgGlobal or Automai\AppLoader\logs) file to our Support Team if needed.